Beltone CHG75 Open User Manual

20
Cleaning the earmold
• First,removethetubingandear-
mold from the hearing instrument.
Keepleftandrightinstrument
separated.
• Removeearwaxwiththecleaning
brush and a soft cloth. If needed,
use a mild solution of soft soap
and water or a special cleaning
solution. Ask your hearing care
practitioner for detailed instructions.
• Rinsetheearmoldwithwater.
Note: Do not use water or other liquid on the hearing instrument
itself.
• Drytheearmoldwithacloth.
• Blowpossiblewaterdropsfrom
tubing and earmold. A special
device is available for this from
your hearing care practitioner.
• Ensurethattheearmoldand
tubing are completely dry before
attaching them to the hearing
instrument. Take care with left and
right instruments, check the figures on page 12.
Replacing the tube
Ask your hearing care practitioner to replace the tubing from the
instrument to the earmould if it turns stiff or changes colour.

Beltone CHG75 Open Specifications

General

Brand	Beltone
Model	CHG75 Open
Category	Hearing Aid
Language	English