8
USB Function Operation
sd card Function Operation
1. Insert the flash drive with multimedia files in the USB port.
2. When you are done, make sure to exit USB play mode first, then eject the device
1. Insert the Micro SD Card with multimedia files in the SD Card Slot.
2. When you are done, make sure to exit SD Card play mode first, then tap on the SD Card to
eject the device. This will unlock the card to make it removable.
1. Touch the icon to enter the SD Card play interface
2. The system will read for supported media files. If there are any mp3 files on the device, it
will first enter music play mode.
3. Touch the icon to return back to the file list.
4. Touch the , or the icon to switch between music, videos, and photos.
5. To exit the application, touch the home icon
NOTE: Due to the limit of screen resolution and compatibility of the video file format, some
video files do not play as well.
If you are using a standard SD Card (not Micro SD), you can use an SD card reader and plug it
into the USB drive.
1. Touch the icon to enter the USB play interface
2. The system will read for supported media files. If there are any mp3 files on the device, it
will first enter music play mode.
3. From here you can control the music like you would be able to in any other application.
4. ID3 Music Data will be displayed in the middle of the display.
5. Touch the icon to return back to the file list.
6. You can scroll through the list using the up and down arrows
7. To exit the application, touch the home icon
Insert/Eject USB Device
Insert/Eject Micro SD Card
Interface operation
Interface operation
The stereo supports USB functionality. The USB must be correctly connected
before use. The system will automatically switch over to USB play mode once a
device is connected.
To Next Page
