LC8810 User Manual V1.0
1
OVERVIEW
The Bematech LC8810 provides unparalleled reliability by being a fanless unit with no moving
mechanical parts. It is an ideal computer for use in harsh environments with high levels of dust or
oil when fan noise is not desirable. For mass storage, solid state disk provides true no-moving-part
operation. In addition, all components and connectors reside on one PC board, thus no internal
cables (sources of common loose connections) are required. The computer is housed in a rugged
die cast case for extra protection. The LC8810 has a very compact form factor - only 2.44”H x
8.15”W x 6.93”L. Standard 75mm and 100mm VESA mounting screw holes at the bottom of
case enable these units to be mounted almost anywhere – on a wall, ceiling, table top or under a
counter.
The LC8810 uses quad-core Intel Baytrail processors, so it can run Windows and Linux-based
applications. Whether your application runs on Windows 8, Windows 7, Windows Embedded
PosReady 7, or Linux*, your operating system needs are supported by the LC8810. This enables
the unit to be used in a wide variety of applications – in a restaurant’s kitchen system, in a POS
workstation, in an auto ID workstation, etc. The LC8810 also provides a very impressive
compliment of up-to-date I/O ports – Ethernet, parallel, PS/2 and multiple USB, RS232, SVGA,
DisplayPort and DVI ports are all included.
To Next Page
Loading...
General