LC8810 User Manual V1.0
2
*Ask our Technical Support Team for more details on supported distributions.
CARE AND HANDLING
The following tips will help keep your LC8810 functioning at the optimal level:
Remember to unplug the display unit from the power outlet before cleaning.
Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use
thinner or benzene, abrasive cleaners or compressed air.
To clean the LC8810 unit cabinet, use a cloth lightly dampened with a mild detergent. Do
not immerse unit in water.
Put the cleaner on the rag and wipe the LC8810. Never apply the cleaner directly on
theLC8810.
Avoid getting liquids inside the LC8810. If liquid does get inside, have a qualified service
technician check it before you power it on again.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
We recommend all servicing done on this product be done by qualified service personnel.
Aside from upgrades or swapping out the SSD or hard-drive please refer all other servicing to
the Bematech RMA Dept.
To Next Page
Loading...
General