Bematech MP200 - Command List; Emulation Epson Tm-U200

MP200 USER MANUAL
Page 9
5. Command List
5.1. EMULATION EPSON TM-U200
Command
Hex Code
Description
HT
<09>H
Horizontal tab
LF
<0A>H
Print and line feed
CR
<0D>H
Carriage Return
DLE EOT
<10>H<04>H<n>
Real-time status transmission
DLE ENQ
<10>H<05>H<n>
Real-time request to printer
ESC SP
<1B>H<20>H<n>
Set right-side character spacing
ESC !
<1B>H<21>H<n>
Set print mode
ESC %
<1B>H<25>H<n>S
Select/cancel user-defined character set
ESC &
<1B>H<26>H
Define user-defined characters
ESC *
<1B>H<2A>H
Select bit-image mode
ESC -
<1B>H<2D><n>
Turn on/off underline mode
ESC 2
<1B>H<32>H
Select 1/6 inch line spacing
ESC 3
<1B>H<33>H<n>
Set line spacing
ESC <
<1B>H<3C>H
Return home
ESC =
<1B>H<3D>H<n>
Select peripheral device
ESC ?
<1B>H<3F>H<n>
Cancel user-defined characters
ESC @
<1B>H<40>H
Initialize printer
ESC D
<1B>H<44>H<n>
Set horizontal tab positions
ESC E
<1B>H<45>H<n>
Turn on/off emphasized mode
ESC G
<1B>H<47>H<n>
Turn on/off double-strike mode
ESC J
<1B>H<4A>H<n>
Print and feed paper
ESC R
<1B>H<52>H<n>
Select an international character set
ESC U
<1B>H<55>H<n>
Turns on/off unidirectional printing mode
ESC a
<1B>H<61>H<n>
Select justification
ESC c 4
<1B>H<63>H<34>H<n>
Select paper sensor to stop printing
ESC c 5
<1B>H<63>H<35>H<n>
Enable/disable panel button
ESC d
<1B>H<64>H<n>
Print and feed n lines
ESC p
<1B>H<70>H
Generate pulse
ESC t
<1B>H<74>H<n>
Select character code table
ESC {
<1B>H<7B>H<n>
Turn on/off upside-down printing mode
GS I
<1D>H<49>H<n>
Transmit printer ID
GS a
<1D>H<61>H<n>
Enable/disable Automatic Status Back
GS r
<1D>H<72>H<n>
Transmit status