Safety Warnings and Guidelines
1. Important operation information:
Read this manual carefully before attempting to operate the instrument.
2. Safety:
3. The operation, maintenance and repair of the instrument should comply with the
basic guidelines and safety warnings below. Noncompliance may interfere with
the useable life of the instrument and safety protection and may void the warranty.
Use this product indoors. Do not operate in a damp or wet
environment.
Before using the instrument, read the manual carefully. This instrument
is designed for use in laboratory environments and must be operated by
skilled personnel with the appropriate training.
Do not attempt to open the casing or repair the instrument. Disassembly
will void the warranty. If there is a service issue with the instrument,
please contact the supplier.
Read this manual prior to powering up the instrument. Pay special
attention to the guidelines and directions below and be familiar with
all safety warnings and guidelines.
Before operation, check to see that the voltage rating on the instrument
matches your local voltage. The rated electrical load of the outlet
should not be lower than that of the instrument's demand. If the power
cord is damaged, it should be replaced. Do not place the power cord
where it will have objects placed on it or where it will be walked on.
When unplugging the instrument, do not pull the plug out of the socket
by the cord.
To Next Page
Loading...