29
4. Reinstall drain plug before lling the engine with fresh oil.
5. Fill the oil to the maximum oil mark. Check the oil level by reinserting the
dipstick without rethreading it.
6. Reinstall the dipstick and tightly fasten it.
Note
BP271 and BP371 oil max. capacity: 600ml.
DO NOT OVERFILL.
SAE10W-30 is recommended for general use. Other viscosities may
be used based on the average temperature range as shown in ‘3.1
Checking the Oil’.
OIL LEVEL
Wing nut
Air Cleaner Cover
Air Filter
Grid
Electrode Gap
0.028 - 0.031 in
(0.7 - 0.8 mm)
Spark Plug
BP SERIES
To Next Page
Loading...
