Benchmark BP Series - Fuel Sediment Cup Service

32
5.5 FUEL SEDIMENT CUP SERVICE
Note
 Switch fuel valve to the OFF position.
1. Unscrew the sediment cup using a wrench and remove the O-ring.
2. Wash the cup and O-ring in a non-ammable solvent and dry thoroughly.
3. Place the O-ring in the fuel valve, then attach sediment cup. Tighten
securely.
4. Switch the fuel valve to the ON position and check for leaks. Replace
O-ring if leakage occurs.
Sediment Cup
Fuel Drain
Screw