16
Operating the Appliance
6 720 610 604 GB (03.06)
3.5 Combination Boilers: Setting the Hot Water
Temperature
Hot water temperature
On combi models, the hot water temperature can be set to
between approx. 40°C and 60°C using the temperature
control .
The domestic hot water temperature is not shown on the display.
Fig. 6
“ECO” button
By pressing and holding the “ECO” button , until the display
lights, you can switch between Comfort mode and Economy
mode.
Comfort mode: button is not lit (factory setting)
The appliance is held constantly at the set temperature. This
means that hot water is available almost instantaneously at the
tap. Consequently the appliance will switch on at intervals, even if
no hot water is being drawn.
Control Setting Water Temperature
Anti-clockwise limit approx. 40°C
approx. 55°C
Clockwise limit approx. 60°C
Table 2
6 720 610 333-07.1O
To Next Page
Loading...
Need help?
General
