Program the second data
storage bin
The
second
group of waypoint
parameters may be entered into the
system's memory in the same fashion.
The usual procedure is
to
change
to
the
next WPT number and then by depres-
sing the DATA Button
(l),
move the caret
from
FRO
(2)
to
RAD
(3)
to
DST
(4)-
although any sequence may be used
as long as the WPT number is selected
first.
In the photo above, waypoint 2 of
our example-25 nm on the 225.0'
radial of OSWEGO VORTAC
(117.6/
0SW)- has already been program-
med and the
KNS
81
system is ready
to
accept other waypoints and their
parameters.
18
To Next Page
Loading...