1. Remove the right and left inspection
lids
2. Disconnect the connectors of the lamp
to be replace
3. Release the xing spring
4. Extract the lamp.
NOTICE
Avoid touching the glass part of the
projector lamp to keep it clean from
any oil trace.On the contrary, the glass
transparency, the duration f the bulb,
the luminosity of the progected light
beam maybe aected. If the bulb be-
comes dirty, accurately clean it using
a cloth wet with alcohol or thinner for
enamel.
5. Installthe new lamp and x it using the
xing spring.
6. Connect the connectors of the new
lamp.
7. Connect the right and left inspection
lids.
Troubleshooting
Although Benelli motorcycles receive a
thorough inspection before shipment
from the factory, trouble may occur du-
ring operation.
Any problem in the fuel, compression, or
ignition systems, for example, can cause
poor starting and loss of power.
The following troubleshooting charts re-
present quick and easy procedures for
checking these vital systems yourself.
However, should your motorcycle require
any repair, take it to a Benelli dealer, who-
se skilled technicians have the necessary
tools, experience, and know-how to servi-
ce the motorcycle properly.
Use only genuine Benelli replacement
parts.
Imitation parts may look like Benelli parts,
but they are often inferior, have a shorter
service life and can lead to expensive re-
pair bills.
32
To Next Page
Loading...
Need help?
General
