EasyManua.ls Logo

Benelli Tornado TNT600 - Throttle Body

Benelli Tornado TNT600
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
39
The idling speed of the motorcycle will decrease because of the throttle body pollution; please
clean the throttle body after each 5000km’s driving.
Please disconnect the negative electrode lead connection of battery and disconnect the
sensor connector installed on the throttle when cleaning the throttle body; remove the
accelerator stay and the hose connected with air lter and intake manifold, then remove the
throttle body.
Open the cover at the bottom of throttle body, spray the detergents onto the inner wall of
throttle body and brush away the dirt and carbon deposit.
After cleaning, please operate in reverse order to install the throttle body and ensure the
proper installation of all parts, then start the engine.
THROTTLE BODY
Do not let the impurities block the bypass airway.