46
Braking system
Please check the following conditions of the braking system every day:
(1) Check if there is leakage of the front and rear wheel braking system.
(2) The brake lever and the brake pedal should have a certain amount of support
resistance.
(3) Check the wearing condition of the brake pad. The essential of checking brake pad
is to watch if the pad is worn. If exceeds the limit line, the two brake pad should be
replaced together.
The motorcycle use DOT3 or DOT4 brake uid. Take care not to allow brake uid to get into with paint
surface or plastic surface because these surfaces will be corroded.
If the braking system or brake disc of your motorcycle needs to be repaired, we recommend that the repair
should be carried out by authorised distributors. They are equipped with complete tools and procient
skills, which will ensure the safest and most economic work. After replacing the new wheel brake disc,
please pick and place the brake lever several times to fully extend the brake disc and restore the normal
support resistance of lever.
To Next Page