5 - 2
Operation and important riding points
EN
5
Shifting
6
5
4
3
2
1
1
2
N
1. Shift pedal
2. Neutral position
Changing gear, the driver determines the
ideal transmission ratio in the various dri-
ving conditions: starting o, accelerating,
climbing hills, slowing down, etc.
The positions of the gear selector are indi-
cated in the illustration.
NOTE
To shift the transmission into the neutral
position, press the shift pedal down repe-
atedly until it reaches the end of its travel,
and then slightly raise it.
NOTICE
• Even with the transmission in the
neutral position, do not coast for
long periods of time with the engi-
ne o, and do not tow the motor-
cycle for long distances. The tran-
smission is properly lubricated
only when the engine is running.
Inadequate lubrication may da-
mage the transmission.
• Always use the clutch while chan-
ging gears to avoid damaging the
engine, transmission, and drive
train, which are not designed to
withstand the shock of forced shi-
fting.
Tips for reducing fuel consumption
Fuel consumption depends largely on
your riding style. Consider the following
tips to reduce fuel consumption:
• Shift up swiftly, and avoid high engi-
nespeeds during acceleration.
• Do not rev the engine while shifting
down, and avoid high engine speeds
with no load on the engine.
• Turn the engine o instead of letting
it idle for an extended length of time
(e.g., in trac jams, at trac lights or
at railroad crossings).
To Next Page
Loading...
Need help?
General
