Benelli TRK 702X User Manual

6 - 33
Periodic maintenance and adjustment
EN
6
Engine overheating
WARNING
• Do not remove the radiator cap when the engine and radiator are hot. Scalding hot uid and steam may be blown out under
pressure, which could cause serious injury. Be sure to wait until the engine has cooled.
• Place a thick rag, like a towel, over the radiator cap, and then slowly rotate the cap counterclockwise to the detent to allow
any residual pressure to escape.
• When the hissing sound has stopped, press down on the cap while turning it counterclockwise, and then remove the cap.
TIP
If coolant is not available, tap water can be temporarily used instead, provided that it is changed to the recommended coolant as soon as
possible.
Wait until the
engine has cooled.
Check the coolant level in the
reservoir and radiator.
The coolant level
is OK.
The coolant level is low.
Check the cooling system
for leakage.
Have a Benelli dealer check
and repair the cooling system.
Add coolant. (See TIP.)
Start the engine. If the engine overheats again, have a
Benelli dealer check and repair the cooling system.
There is
leakage.
There is
no leakage.

Benelli TRK 702X Specifications

General

Displacement	698 cc
Transmission	6-speed
Fuel Tank Capacity	20 liters
Wheelbase	1505 mm
Max Torque	68 Nm
Fuel System	Electronic fuel injection
Front Suspension	Upside-down fork
Rear Suspension	Swingarm with central shock absorber
Front Brake	Double disc
Rear Brake	Single disc
Weight	220 kg
Tires Front	110/80 R19
Tires Rear	150/70 R17
Engine Type	2-cylinder, 4-stroke, liquid-cooled