Beninca AU.TR - User Manual

AUTOMATISMI PER CANCELLI
®
L8542619
Rev. 07/00/02
Libro istruzioni
Operating instructions
Betriebsanleitung
Livret d’instructions
Libro de instrucciones
UNIONE NAZIONALE COSTRUTTORI
AUTOMATISMI PER CANCELLI, PORTE,
SERRANDE ED AFFINI
A
Z
I
E
N
D
A
C
E
R
T
I
F
I
C
A
T
A
UNI
EN ISO
9001
AU.TR
AU.TRL
CENTRALINA A MICROPROCESSORE PER
CONTROL UNIT WITH MICROCONTROLLER FOR
MIKROCONTROLLER-STEUERUNG FÜR
CENTRALE A MICROCONTRÔLEUR POUR
CENTRALITA A MICROPROCESADOR POR

Summary

Beninca AU.TR;AU.TRL Control Unit Overview

Libro Istruzioni - Document Purpose

Indicates the document is operating instructions for the Beninca control unit.

EC Declaration of Conformity

Conformity to EMC and Low Voltage Directives

Details compliance with EMC (89/336/EEC) and Low Voltage (73/23/EEC) directives.

Applied Harmonized and National Standards

Lists harmonized standards (EN 55022, EN 60204-1) and national standards (UNI 8612).

Control Unit Component Layout

Power Inputs and Fuses

Identifies power supply terminals (230Vac) and fuses (F1, F2, F3) for the control unit.

Input and Output Terminals

Details connections for sensitive edges, limit switches, motor, sensor, and radio board.

Programming Controls and Indicators

Explains programming button, dip-switches for exclusion, and status LEDs (MCU, MOT).

Control Unit Installation and Programming

Terminal Assignments and Installation Steps

Defines terminal functions (1-29), jumpers, and outlines the installation procedure.

Normal and Programmable Functions

Explains dip-switch settings for normal operations and how to access programmable functions.

Selectable Function Parameters

Programming Menus and Dwell Times

Details dip-switch configurations for programming menus and automatic closure dwell times.

Courtesy Light Duration Settings

Configures the duration of the courtesy light using dip-switch settings.

Advanced Settings and Programming Example

Speed Sensitivity and Braking Adjustments

Adjusts sensitivity to speed changes during stroke/braking and sets braking space.

Motor Power and Programming Example

Sets motor power during braking and provides a practical programming example.

Beninca AU.TR Specifications

General

Motor power supply	230 Vac
Operating temperature	-20°C to +50°C
Protection class	IP54
Input Voltage	230 Vac
Protection Degree	IP54
Power supply	230 Vac (50-60Hz)
Motor power	600 W
Output Voltage	230 Vac