5
PRODUCT VIEW
1. On/off Switch
2. Vacuum Function Hose Port
3. Motor Unit
4. Dirt/water Tank
5. Castor Wheels
6. Blower Function Hose Port
7. Crevice Tool
8. Dusting Brush
9. Drainage Plug
10. Flex Hose
11. Carry Handle
12. Extension Tubes
13. Multi-Surface Vacuum
Nozzle (Dry Vacuuming Only)
14. Wet Pick-up Vacuum Nozzle
15. Power Cord Hook
16. Motor Unit Securing Clips
17. Accessories Storage
18. Power Cord with Plug
19. Suction Control Valve
20. Mico Particle Filter
ASSEMBLY INSTRUCTIONS:
Your Bennett Read Tough 35 needs very little assembly, please read and
follow the below instructions carefully:
1. Remove unit from packaging
2. Remove attachments from their packaging
3. Some of the packaging poses a choking risk to small children.
Dispose of the packaging responsibly. Recycle if possible
4. Before using for the first time check that all attachments listed are
included. If the unit is incomplete, return to the retailer immediately.
Take entire unit, packaging and proof of purchase to the store
where your purchase was made
5. Remove the Motor Unit (3) from the Dirt Tank (4) by loosening the
Securing Clips (16). Push Securing Clips (16) outwards to release
6. Turn the Dirt Tank (4) upside down
Note: you will need a Phillips screwdriver to complete the assembly
1
2
3
11
12
19
17
13
4
7
10
8
9
6
5
16
18
15
14
20
To Next Page
Loading...
