6
OPERATIONS
Only operate your Bennett Read Tough 35 in accordance with the instruction manual. Failure
to follow these instructions will result in decreased cleaning performance and may invalidate
your guarantee.
DRY VACUUMING:
Your Bennett Read Tough 35 Vacuum is perfect for vacuuming carpets, tiles, mattresses,
upholstery, curtains and car upholstery.
Setting up your Bennett Read Tough 35 for dry vacuuming:
1. Remove the Motor Unit (3) from the Dirt Tank (4) by pushing the Locking Clips (16)
outwards
7. Insert Castor Wheels (5) into the
Wheel base as shown
8. Insert all caster wheel
assemblies (5) at the
bottom of the Dirt Tank (4)
into the holes provided,
insert the screw and
tighten with Phillips
screwdriver. Take care not
to over-tighten the screws
as this may damage the
thread.
9. Your Tough 35 is now ready to be set up for your desired application.
2. Ensure that the Microparticle filter (20) is securely installed in place:
(A) (B)
To Next Page
Loading...
