11
Cleaning the LCD screen (SW242/SW272 only)
As your monitor panel comes with a special anti-glare coating, use and clean the monitor
carefully.
• Stains on the monitor screen could be obvious. Be cautious when you use or clean the
monitor and avoid getting oil or dust on the screen.
• Fingerprints and dust under normal use could be wiped away by the supplied cleaning
cloth.
• Clean the screen surface gently and carefully. Hard scrubbing could damage the screen
coating.
Be sure to follow the instructions to clean the screen surface appropriately.
Using the screen cleaning cloth (recommended)
There is one screen cleaning cloth in the product package. The supplied cleaning cloth is
highly recommended to clean your monitor screen. It is an eco-friendly design as it is
reusable, washable, and liquid-free.
1. Unplug the monitor from the power outlet before cleaning.
2. Make sure there is no sharp debris on the cleaning cloth to avoid scratching the screen.
3. Hold the edge of the monitor and avoid excessive force on the screen.
4. Make sure the supplied cleaning cloth is clean and dry. Start with a small, clean part of
the cloth and wipe the stained area of the screen gently in circles. If it is still not clean,
continue with another clean part of the cloth to avoid spreading the grease around. If
both sides of the cloth are used and get dirty, wash and dry the cloth properly.
5. If necessary, apply a small drop of 70% Isopropanol (IPA) or alcohol-free screen cleaner
on a small, clean part of the supplied cleaning cloth, and wipe the stained area gently in
circles. See Using a screen cleaner (purchased separately) on page 12 for more
information.
Please follow these safety instructions for best performance, and long life for your monitor.
To prevent the seams around the cleaning cloth from marring the screen surface, avoid wiping the screen
with the edge of the cleaning cloth.
To Next Page
Loading...
