EasyManua.ls Logo

BenQ AQ COLOR SW242Q - Using a Screen Cleaner (Purchased Separately)

BenQ AQ COLOR SW242Q
75 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
6. Use a clean part of the cloth to wipe dry the screen completely.If it is still not clean,
continue with another clean part of the cloth to avoid spreading the grease around.
Repeat this step until the screen is clean.
7. The cleaning cloth may get dirty after using several times and may not be able to clean
the screen properly. Wash it with detergent and remove debris from it by hand if
necessary. Keep it in a cool place until it is dry. Make sure it is completely dry before
next cleaning.
Using a screen cleaner (purchased separately)
• Use screen cleaning wipes which are pre-moistened and alcohol-free. You can wipe away
oil and fingerprints easily.
• Use a 70% Isopropanol (IPA) or alcohol-free screen cleaner kit. Spray on the microfiber
cloth that came with the screen cleaner kit, and wipe stains off the screen. Never spray
anything directly onto the screen.
• Make sure no liquid goes into the gap between the screen and the bezel. Liquids inside the
monitor could cause short circuits.
non-alcohol
Alcohol

Table of Contents

Related product manuals