23
Installing the batteries to Hotkey Puck G3
Applicable for models with Hotkey Puck G3.
1. Turn the battery cover counterclockwise to remove
the battery cover.
2. Insert the provided two AAA Zinc-Carbon batteries
onto the battery holder properly.
3. Put the battery cover back. Make sure the arrows
inside the cover and on the Hotkey Puck G3 are
aligned. Turn the battery cover clockwise until you
cannot go further.
• Keep the batteries out of reach of children.
• If the Hotkey Puck G3 will not be used for an extended period of time, remove the batteries.
To Next Page
Loading...
