BenQ C600 Mobile Phone
If the attempt to make a call has failed, according to the setting in
Retry Mode
, you can redial the last dialed number manually or let
the phone redial the number automatically.
The phone rings or vibrates when a call is received. If the caller's
number can be found in the Phone Book, the caller's name will appear
on the screen. The call time will also be shown.
You can press key to answer that call. Depending on the setting
in
Answer Mode
$
$$
$ “Answer By” on page 49%
%%
%, you can also
choose to answer a call by pressing any key (except key) on the
keypad or turn on the auto answer function when used with a hands-
free kit.
When you are on a call, you can press key to end the call. The
call timer information will flash on the screen for about three seconds
and the phone will then return to standby mode.
If the total call time exceeds the value you set in the
Limit Alert
function (see “Limit Alert” on page 51), a warning tone will be
generated to remind you of the total call time.
During a phone call, you can choose to use the following features:
• Press the alphanumeric keys to send DTMF tone (for example,
when you are asked to enter ID number, account number or
other data).
• Press key to hold the call and receive another call from a
third calling party.
• Press the volume adjustment keys to adjust the ear piece volume.
• Press the “Option” soft key to enter the
In Call Option
menu.
In the menu, you can highlight the desired item by pressing
or on the scroll key and then press “Select” soft key to select.
Mute (Unmute):
Mute or unmute current call.
3-Way:
activate 3-way call (see “Three way call” on page 19).
Redialing a call
Answering a call
Ending a call
In call options
To Next Page
Loading...