BenQ C600 Mobile Phone
Phone Book:
Enter Phone Book (see “Phone Book Menu” on
page 25).
Scheduler:
Access Scheduler (see “Scheduler” on page 39).
Scratch Pad:
Use the built-in Scratch Pad to jot down phone
numbers. You can save them as described in “Scratch pad” on
page 44.
If another call is received during a call, the message “Waiting” and
name (or number) of the third calling party will appear on the screen.
• To put the current call on hold and answer the incoming call, press
key. When the incoming call is ended, you will return to the
previous call automatically.
• To reject the third incoming call, press the “Cancel” soft key.
While you are speaking, you can initiate another call to a third calling
party.
• Press the “Option” soft key and select “3-Way” in the menu and
make a call to the third party by entering the number and press
key. Or during the call, press key to hold the call and
enter the number of the third calling party and press key
again.
• When the third party is connected, press key again and all
the three calling party will be connected.
• To switch the calling party, press key. To disconnect all calls,
press key.
In the standby mode, if the speed dial function is turned on, you can
long press a alphanumeric key (key 1 ~ 9) to dial the number located
in #1 ~ #9 in the Phone Book.
Call waiting
Three way call
Speed dial
To Next Page
Loading...