BenQ DC 5530 User’s Manual
Preparing Your DC E30 for Use6
E
EE
En
nn
ng
gg
gl
ll
li
ii
is
ss
sh
hh
h
of Contents
2.2
2.22.2
2.2 Inserting an SD Memory Card (optional accessory)
Inserting an SD Memory Card (optional accessory)Inserting an SD Memory Card (optional accessory)
Inserting an SD Memory Card (optional accessory)
The camera comes with 16MB (14MB available for
image storage) of internal memory, allowing you to
store images and video clips in the camera. However,
you can expand the memory capacity by using an
optional SD (Secure Digital) memory card so that you
can store additional images and video clips.
1. Make sure the camera is turned off.
2. Insert an SD memory card:
• The front side of the memory card (printed
arrow) should face towards the rear side of the
camera.
• If the card cannot be inserted, check the orientation.
2.3
2.32.3
2.3 To remove a memory card:
To remove a memory card:To remove a memory card:
To remove a memory card:
Make sure the camera is turned off. Press lightly on
the edge of the memory card and it will eject.
Note
NoteNote
Note
• Be sure to format the memory card with this camera before its initial usage. Refer to
section in this manual titled Formatting Media for further details.
Note
NoteNote
Note
• To prevent valuable data from being accidentally erased from an SD memory card you
can slide the write protect tab (on the side of the SD memory card) to “LOCK”.
•
To save, edit, or erase data on an SD memory card, you must unlock the card.
To Next Page
Loading...
Need help?
General
