BenQ DC E30 User Manual

BenQ DC 5530 User’s Manual
E
EE En
nn ng
gg gl
ll li
ii is
ss sh
hh h
Preparing Your DC E30 for Use 7
2.4
2.42.4
2.4 Attaching the Hand Strap:
Attaching the Hand Strap:Attaching the Hand Strap:
Attaching the Hand Strap:
To prevent accidental dropping of the camera, always
use the strap.
2.5
2.52.5
2.5 Turning the Power On/Off
Turning the Power On/OffTurning the Power On/Off
Turning the Power On/Off
The camera is switched between On/Off as follows:
1. You can use the POWER button to power on/off
the camera.
• Open the lens cover before you start taking
pictures/recording video clips.
• When the power is turned on, the camera will
start in the mode.
2.6
2.62.6
2.6 Setting the Date and Time
Setting the Date and TimeSetting the Date and Time
Setting the Date and Time
The Date & Time screen will be presented if/when:
• Camera is turned on for the first time.
• Camera is turned on after leaving the camera without batteries for an extended period of
time.
When the Date & Time screen appears, follow these
steps to set the correct date and time.
1. Select the setting item with the / buttons and
press the button.
• [Date]: Set the date.
• [Time]: Set the time.
• [Mode]: Set the date and time format.
2. Press the / buttons to change the value and press the SET button to confirm.
• [Date]/[Time]: Press the button to select the field item.
3. To g gl e t h e SET button to return to the main menu.
Note
NoteNote
Note
•
If the camera goes unused for a certain period of time while the camera is powered on,
the camera will switch to an idle mode, and eventually turn itself off to conserve power.

BenQ DC E30 Specifications

General

Brand	BenQ
Model	DC E30
Category	Digital Camera
Language	English