BenQ DC 5530 User’s Manual
Camera Operating Mode18
E
EE
En
nn
ng
gg
gl
ll
li
ii
is
ss
sh
hh
h
of Contents
1. To g gl e t h e MODE button to , and press the SET
button.
2. Press the MENU button.
3. Select [DPOF] using the / buttons and press
the button.
4. Select [Single] using the / buttons and press
the SET button.
5. Select the desired field item using the / buttons
and press the SET button.
• [Quantity]: Allow you to select the image quantity
(0~9). Use the / buttons to select
the desired image quantity.
• [Set Image]: Allow you to select another desired still
image you want to specify using the
/ buttons.
• [Exit]: Allow you to exit from the menu mode.
Press the SET button to exit from menu
mode.
To set the DPOF setting on all still images (at once):
1. To g gl e t h e MODE button to , and press the SET
button.
2. Press the MENU button.
3. Select [DPOF] using the / buttons and press
the button.
4. Select [All] using the / buttons and press the
SET button.
5. To confirm the setting, use the / buttons to
select [Yes] and press the SET button. (Quantity=1)
Note
NoteNote
Note
• This function can be used only on still image files that are saved on memory cards.