BenQ DC 5530 User’s Manual
English
Preparing Your DC E300 for Use 7
2.4 Attaching the Hand Strap:
To prevent accidental dropping of the camera, always
use the strap.
2.5 Turning the Power On/Off
The camera is switched between On/Off as follows:
1. You can use the POWER button to power on/off
the camera.
• Open the lens cover before you start taking
pictures/recording video clips.
• When the power is turned on, the camera will
start in the mode.
2.6 Setting the Date and Time
The Date & Time screen will be presented if/when:
• Camera is turned on for the first time.
• Camera is turned on after leaving the camera without batteries for an extended period of
time.
When the Date & Time screen appears, follow these steps
to set the correct date and time.
1. Select the setting item with the / buttons and
press the button.
• [Date]: Set the date.
• [Time]: Set the time.
• [Mode]: Set the date and time format.
2. Press the / buttons to change the value and press the SET button to confirm.
• [Date]/[Time]: Press the button to select the field item.
3. Toggle the SET button to return to the main menu.
Note
•
If the camera goes unused for a certain period of time while the camera is powered on,
the camera will switch to an idle mode, and eventually turn itself off to conserve power.