BenQ DC E300 User Manual

BenQ DC 5530 User’s Manual
Camera Operating Mode10
English
e
of Contents
• Toggle the button to magnify up to 4x.
4. Press the shutter button to capture a “zoomed” image.
3.1.3 Self-Timer
The self-timer duration is ten seconds. Activate the self-timer by pressing the shutter button.
The self-timer LED blinks slowly for seven seconds and then blinks rapidly for the last three
seconds. This allows you to get into the scene when taking group images.
1. Secure the camera to a tripod or place it on a stable
surface.
2. Toggle the MODE button to , and press the SET
button.
3. Press the MENU button.
4. Select [Self Timer] using the / buttons and
press the button.
5. Use the / buttons to select [Yes], and press
the SET button.
• Toggle the button to exit from the menu mode.
6. Press the shutter button.
• The self-timer function is activated.
• To cancel the self-timer at any time, press the shutter button to disrupt the sequence.
3.1.4 Flash
The flash is designed to function automatically when lighting conditions warrant the use of
flash. When you are in Normal mode (the focus switch is set to ), you can take an image
using a flash mode suitable to your circumstances.
Note
•
Digital zoom is only available at the resolution of 2912 x 2184 and 2032 x 1520 pixels.
Note
•
After an image is taken using self-timer, the self-timer mode is turned off.
• If you wish to take another image using the self-timer, repeat these steps.

BenQ DC E300 Specifications

General

Brand	BenQ
Model	DC E300
Category	Digital Camera
Language	English