BenQ DC 5530 User’s Manual
English
Camera Operating Mode 9
3 CAMERA OPERATING MODE
This chapter describes the camera operating modes, and explains how to take pictures, record
movie clips and play back photos, movies.
3.1 Record Mode
3.1.1 Taking Images
Your camera is equipped with a 1.5” LCD monitor to
compose images. Before you start taking pictures, be sure
that the lens cover is opened and the focus switch is set
to the appropriate photography mode.
1. Open the lens cover.
2. Set the focus switch to .
3. Toggle the MODE button to , and press the SET
button.
4. Compose your shot on the display screen.
5. Place the subject of your photo at the center and press the shutter button.
3.1.2 Digital Zoom
Using digital zoom, images appear closer. Digital
processing lets you zoom in the image without
deterioration.
1. Toggle the MODE button to , and press the SET
button.
2. Compose your picture while viewing the LCD
monitor.
3. Press the button to activate the digital zoom.
Note
•
The LCD display darkens in strong sunlight or bright light. This is not a malfunction.
• For a close-up photography, set the focus switch to . The flash mode is automatically
set to .
• To review the last recorded image, press the button. Press the button again to
return to the record mode.
To Next Page
Loading...
Need help?
General
