19 Starting up the projector
Starting up the projector
1. Plug the power cord. Turn on the power outlet switch
(where fitted). The power indicator on the projector
lights orange after power has been applied.
2. Press on the projector or on the remote
control to start the projector. The power indicator
flashes green and stays green when the projector is on.
The start up procedure takes within one minute. In the
later stage of start up, a startup logo is projected.
(If necessary) Rotate the focus ring to adjust the image
clearness.
3. If this is the first time you turn on the projector, the setup wizard appears to guide you through
setting up the projector. If you have already done this, skip this step and move on to the next step.
• Use the arrow keys ( / / / ) on the projector, remote control or plug in mouse to control and
move through the menu items.
• Use OK to confirm the selected menu item.
• Use the back button (BACK) to return to the previous menu.
• Use the menu button to skip a menu.
If the Wi-Fi dongle is not plugged, follow the instructions on the screen to install it.
• Please use the original accessories (e.g. power cord) to avoid possible dangers such as electric shock and fire.
• If the projector is still hot from previous activity, it will run the cooling fan for approximately 90 seconds before
energizing the lamp.
The Setup Wizard screenshots are for reference only and may differ from the actual design.
To Next Page
Loading...
