BenQ EH620 - Page 35

35 Operation (under Launcher source)
3. Select the already connected speaker or headphones from the Device List in the Bluetooth
setting menu and press OK.
4. Confirm that you want to disconnect the speaker or headphones from the projector.
5. Activate Bluetooth-pairing mode on the new speaker or headphones.
6. Select the new speaker or headphones from the Device List in the Bluetooth setting menu and
press OK.
Deactivating the Bluetooth speaker or headphones
To deactivate Bluetooth on the projector so that it no longer outputs its audio to a separate speaker or
headphones:
1. On the home screen of the BenQ Launcher interface select the Settings button and press OK.
2. Select Bluetooth and press OK.
3. Select Bluetooth and press OK to disable Bluetooth.