BenQ EH620 - Page 52

52 Operation (under non-Launcher source)
Information
Audio
Settings
• Sound Mode: Sets Sound Mode from among Cinema, Music, and Vocal.
• Mute: Temporarily turns off the sound.
• Volume: Adjusts the sound level.
• Power On/Off Ring Tone: Turns on or off the ring tone when the projector is
in startup and shutdown process.
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound
mute or changing the sound level will not affect the Power On/Off Ring Tone.
Restart
intelx86
Smart System
Restarts intel smart system. Closes all apps, turn off the smart system and turns it
on again.
Factory
Default
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, Auto Vertical Keystone, Projector
Installation, Light Usage Time, Security Settings, Baud Rate, High Altitude Mode,
HDMI Equalizer, Digital Shrink & Shift, BLANK, Network.
Reset System
Returns all of the adjustments you’ve made for the System menu to the factory
preset values.
Information
• Native Resolution: Shows the native resolution of the projector.
• Detected Resolution: Shows the native resolution of the input signal.
• Source: Shows the current signal source.
• Picture Mode: Shows the selected mode in the Picture menu.
• Light Mode: Shows the selected mode in the Light Settings menu.
• 3D Format: Shows the current 3D mode.
• Color System: Shows input system format.
• Light Usage Time: Shows the number of hours the light source has been used.
• Firmware Version: Shows the firmware version of your projector.
• Service Code: Shows the projector serial number.