21 How to adjust the screen refresh rate
6. How to adjust the screen refresh rate
You don’t have to choose the highest possible refresh rate on an LCD display, because it is not
technically possible for an LCD display to flicker. The best results are obtained by using the factory
modes already set in your computer. There is a table with the factory modes in the specification
section of this User Manual: Supported PC Timings on page 47
You can choose 60, 70 and 75 Hertz, (but not 72Hz) for the native resolution of 1920 x 1200.
1. Double click the Display icon in Control Panel.
2. From the Display Properties window, select the Settings tab and click the Advanced button.
3. Select the Adapter tab, and select an appropriate refresh rate to match one of the applicable
factory modes as listed in the specification table.
4. Click Change, OK, then Ye s .
5. Close the Display Properties window.
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
Need help?
General
