BenQ FP241VW - Specifications

48 Specifications
11. Specifications
Model FP241VW
Display type
Viewable diagonal
Native (maximum) resolution
Colors
Contrast / Brightness
Dynamic contrast ratio
Response time*
Viewing angle (left/right, up/down)
24.0”, active, TFT
611.32 mm
1,920 x 1200
16.7 million
1000:1 / 500 cd/m
2
2000:1 (typical)
16 ms
6 ms (GTG*)
12 ms (MPRT*, PerfectMotion* Level 3)
178, 178 (CR>10)
Line frequency
Image frequency
30 - 81 kHz Multi- frequency monitor
56 - 76 Hz modes within these parameters
Image diagnostics
Controls
Functions
Digital, OSD Technology, i key (automatic image
setting)
9 keys and i key.
Contrast, brightness, vert. & hor. image position,
phase, pixel clock, color balance, color palette,
hue, saturation, sharpness, multiple-language
OSD, OSD position, OSD lock, input selection,
PIP input selection, PIP adjustments, picture
mode, Senseye demo, PerfectMotion activation,
display mode, DDC/CI*, DynamicContrast,
Overscan
Power management
Max. power consumption
Standby power consumption
VESA DPMS, EPA
< 95 Watt (without USB port)
< 2 Watt
Input signals
Synchronization
RGB analog 0.7 Vpp/75 Ohm positive, DVI-D,
Composite, Component, S-Video, HDMI
TTL separate signal connection 15-pin mini D-sub
cable
Temperature (operating)
Air humidity (operating)
0 °C - 40 °C
10% - 90%
Downloaded from ManualMonitor.com Manuals