EasyManuals Logo
Home>BenQ>Monitor>G2010WP

BenQ G2010WP Service Manual

BenQ G2010WP
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
2. Precautions & Safety Notices
2.1 Safety Precaution
This monitor is manufactured and tested on a ground principle that a user’s safety comes first. However, improper used
or installation may cause damage to the monitor as well as to the user.
WAR NI NG S:
z This monitor should be operated only at the correct power sources indicated on the label on the rear of the monitor.
If you’re unsure of the power supply in you residence, consult your local dealer or Power Company.
z Do not try to repair the monitor by yourself, as it contains no user-serviceable parts. This monitor should only be
repaired by a qualified technician.
z Do not remove the monitor cabinet. There is high-voltage parts inside that may cause electric shock to human
bodies.
z Stop using the monitor if the cabinet is damaged. Have it checked by a service technician.
z Put your monitor only in a lean, cool, dry environment. If it gets wet, unplug the power cable immediately and
consult your closed dealer.
z Always unplug the monitor before cleaning it. Clean the cabinet with a clean, dry cloth. Apply non-ammonia based
cleaner onto the cloth, not directly onto the class screen.
z Do not place heavy objects on the monitor or power cord.
2.2 Product Safety Notice
Many electrical and mechanical parts in this chassis have special safety visual inspections and the protection
afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage,
etc. Before replacing any of these components read the parts list in this manual carefully. The use of substitute
replacement parts, which do not have the same safety characteristics as specified in the parts list, may create shock,
fire, or other hazards.
2.3 Service Notes
z When replacing parts or circuit boards, clamp the lead wires around terminals before soldering.
z Keep wires away from high voltage, high temperature components and sharp edges.
z Keep wires in their original position so as to reduce interference.
z Adjustment of this product please refers to the user’ manual.

Other manuals for BenQ G2010WP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BenQ G2010WP and is the answer not in the manual?

BenQ G2010WP Specifications

General IconGeneral
BrandBenQ
ModelG2010WP
CategoryMonitor
LanguageEnglish

Related product manuals