22 Operation
Using the menus
The projector is equipped with 2 types of On-Screen Display (OSD) menus for making various
adjustments and settings.
• Basic OSD menu: provides primary menu functions. (See Basic menu on page 34)
• Advanced OSD menu: provides full menu functions. (See Advanced menu on page 36)
To access the OSD menu, press MENU on the projector or remote control.
• Use the arrow keys ( / / / ) on the projector or remote control to move through the menu
items.
• Use OK on the projector or remote control to confirm the selected menu item.
The first time you use the projector (after finishing the initial setup), Advanced OSD menu
displays.
Below is the overview of the Advanced OSD menu.
If you intend to switch from the Advanced OSD menu to the Basic OSD menu, follow the
instructions below:
1. Go to Advanced Menu - System > Menu Settings and press OK.
2. Select Menu Type and OK.
3. Press / to select Basic. Next time when you turn on the projector, you may access the
Basic OSD menu by pressing MENU.
The OSD screenshots below are for reference only, and may differ from the actual design.
Main menu
& Main
menu icon
Press BACK to go
to the previous
page.
Sub-menu
Press MENU to
exit.
Current
input signal
Status
Press OK
to enter the
menu.
Picture
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Off
Reference Mode
1
7
6
Brilliant Color
Advanced Color Settings
Display
Network
Settings
Information
Enter Exit
Return
Presentation
Presentation
Reset Picture
System
2
3
4
5
To Next Page
Loading...
