51 Specifications
Specifications
Projector specifications
All specifications are subject to change without notice.
Optical
Resolution
1920 (H) x 1200 (V)
Display system
1-CHIP DMD
Lens
LU935: F = 1.81~2.1, f = 14.3~22.9 mm
LU935ST: F = 1.83~1.86, f = 8.6~9.4 mm
Clear focus range
LU935: 1.75 – 5.84 m@Wide, 2.8 – 5.61 m@Tele
LU935ST: 1.04 – 3.47 m@Wide, 1.15 – 2.29 m@Tele
Light source
Laser
Electrical
Power supply
AC100–240V, 5.3A, 50–60 Hz (Automatic)
Power consumption
495 W (Max); < 0.5 W (Standby); < 2 W (when the
Network function in the Standby
Settings is on)
Mechanical
Weight
7.0 Kg (15.4 lbs)
Output terminals
RGB output
D-Sub 15-pin (female) x 1
Speaker
10 watt x 2
Audio signal output
PC audio jack x 1
3D VESA
3D VESA OUT x 1
Control
USB
Type-A x 1 (5V/1.5A)
RS-232 serial control
9 pin x 1
LAN control
RJ45 x 1
12V trigger x 1
IR receiver x 2
Wired remote control x 1
Input terminals
Computer input
RGB input
D-Sub 15-pin (female) x 1
Video signal input
SD/HDTV signal input
Analog - Component (through RGB input)
Digital - HDMI x 2
HDBaseT x 1
Audio signal input
PC audio jack x 1
3D VESA
3D VESA IN x 1
Environmental Requirements
Operating temperature
0°C–40°C at sea level
Operating relative humidity
10%–90% (without condensation)
Operating altitude
0–1499 m at 0°C–35°C
1500–3000 m at 0°C–30°C (with
High Altitude Mode on)
Storage temperature
-20°C–60°C at sea level
Storage humidity
10%–90% RH (without condensation)
Storage altitude
30°C@ 0~12,200m above sea level
Transporting
Original packing or equivalent is recommended
Repairing
Please visit below website and choose your
country to find your service contact window.
http://www.benq.com/welcome
To Next Page
Loading...
