BenQ LU960ST2 - RS232 Via LAN; Settings

6
Baud rate
9600 / 14400 / 19200 / 38400 / 57600 / 115200 bps
Check the baud rate of the connected projector from its OSD
menu.
Data length
8 bit
Parity check
None
Stop bit
1 bit
Flow control
None
RS232 via LAN
Settings
1. Find the Wired LAN IP address of the connected projector from the OSD menu and
make sure the projector and the computer are within the same network.
2. Input 8000 in the TCP port # field.
PC or laptop
RJ45 port on a projector
LAN cable