BenQ MH760 - Source Menu Functions

54
Using the projector
English
Source menu
Function Description
Quick Search
Allows the projector to search automatically for input sources. If the source
scan is On, the projector will scan for input sources until it acquires a signal. If
the function is not activated, the projector selects the last used input source.
HDMI Format
HDMI Format
Selects an input source type for the HDMI signal. Auto is the default and
recommended setting. You can also manually select the source type. The
different source types carry different standards for the brightness level.
This function is only available when the HDMI signal is selected.
Color Space Conversion
In the unlikely event that you connect the projector to a device (like a DVD or
Blu-ray player) via the projector’s HDMI input and the projected picture
displays wrong colors, please change the color space to an appropriate one that
fits the color space setting of the output device.
• Auto: Automatically selects a suitable color space for the incoming
HDMI signal.
• RGB: Sets the color space as RGB.
• YUV: Sets the color space as YUV.
These functions are only available when the HDMI/MHL or HDMI signal is
selected.
HDMI Equalizer
Adjusts the equalizer gain settings for an HDMI signal. The higher the setting,
the stronger the gain value. If there are more than one HDMI port on the
projector, select the HDMI port first before adjusting the value.
Audio Settings
See "Adjusting the sound" on page 39 for details.
Position
Displays the position adjustment page. To move the projected picture, use the
directional arrow keys. The values shown on the lower position of the page
change with every key press you made until they reach their maximum or
minimum. They will return to their factory preset values whenever the
projector is re-started.
This function is only available when the Component or PC signal
is selected.
Phase
Adjusts the clock phase to reduce picture distortion.
This function is only available when the
Component or PC signal is selected.
H. Size
Adjusts the horizontal width of the picture.
This function is only available when the Component or PC signal
is selected.