BenQ MP512 - Page 9

9
Maximum
Normal mode: 33dBA @ 25°C
Eco mode: 28dBA @ 25°C
6.4 Altitude
Operating:
Without high altitude mode 0°C~35°C @ 0~1499m above sea
level
With high altitude mode 0°C~30°C @ 1500~3000m above sea
level
Non-operating:
30℃@0~12,200m above sea level
7.0 Regulatory
Safety cTUVus, TUV-GS, CCC, CB Report, PSE, GOST-R,
PSB, SASO, eK, TUV-Argentina, CE, NOM
EMC FCC Class B requirements, C-Tick, VCCI, CE
ESD Qisda ESD Specification
8.0 Reliability
8.1 MTBF
40000 hours except DMD chip, Color wheel, Lamp, Fan and
Ballast
8.2 Lamp Lifetime
Normal : 3000 hours (50% brightness maintenance)
Eco: 4000 hours
9.0 Power Requirements Adhere to Appendix B
9.1 Power Supply (Normal) VAC 100
–
240 (50/60Hz),
9.2 Power consumption
Typical 280W Max.
Standb
y
5W Max.
9.3 Power Connector IEC-06
10.0 Panel Specification
10.1 Type 0.55” SVGA LVDS Type-X DMD
10.2 Pixels H: 800 X V: 600
10.3 Color Depth 24 Bits (16770000 colors)
11.0 Compatibility Appendix
A
11.1 PC
PC Compatible 640X480 Æ 1024X768, compressed 1280X1024;
Composite-Sync; Sync-on-Green; Interlace Mode (8514A);
11.2 Video
NTSC/ NTSC4.43/ PAL (Including PAL-M, PAL-N)/ SECAM/
PAL60/
11.3 YpbPr NTSC (480i)/ 480p/ PAL (576i)/ 576p, HDTV (720p/ 1080i)
11.4 DDC EDID 1.3
12.0 Image Interface Adhere to Appendix
A
12.1 Analog RGB Input
15 pin D-Sub (Female) x 1
G(Y): Video amplitude 0.7/1.0 Vp-p : Impedance 75
RB(CbCr): Video amplitude 0.7 Vp-p : Impedance 75
HD/VD/CS: TTL Level
12.2 Video Input
RCA jack (Yellow)
Video amplitude 1.0 V
p
-
p
: Impedance 75Ω
12.3 S-Video Input
4 pin Mini-Din (Female)
Y: Luminance amplitude 1.0 V
p-p
: Impedance 75Ω
C: Chroma amplitude 0.286 V
p
-
p
: Impedance 75Ω
12.4 YPbPr Input 15 pin D-Sub (Female) x 1
Y: Luminance amplitude 1.0 V
p-p
: Impedance 75Ω
PbPr/C
b
C
r
: Chroma amplitude 0.7 V
p
-
p
: Impedance 75Ω