BenQ MP515 - Remote control via web browser

Operation 43
Controlling the projector remotely through a web browser
Once you have the correct IP address for the projector and the projector is on or in
standby mode, you can use any computer that is on the same local area network to
control the projector.
1. Enter the address of the projector in the address bar of your browser and click Go.
2. The remote network operation page opens. This page allows you to operate the
projector as if you were using the remote control or control panel on the projector.
• Menu (Exit) • Blank
See "Remote control" on page 12 for
details.
• Auto • Source
• ( ) • ( )
• ( )
• ( )
• Enter
Activates the selected On-Screen
Display (OSD) menu item.
To switch input source, click on your desired signal.
The source list varies according to the connectors available on the
projector. ''Video 1'' stands for the Video signal; ''S-Video 1'' stands for
the S-Video signal.
i
ii
i
ii