What to do if BenQ Projector remote control does not work?
If your BenQ Projector's remote control isn't working, there are a few potential reasons. First, the batteries may be dead, so try replacing them with new ones. Second, an obstacle might be blocking the signal between the remote and the projector; make sure there's a clear line of sight. Finally, you might be too far away; try standing within 8 meters (26 feet) of the projector.
How to fix BenQ Projector that does not turn on?
If your BenQ Projector isn't turning on, first, ensure the power cord is securely plugged into both the projector's AC power jack and a functioning power outlet, and that the outlet switch is on, if applicable. Also, if you've recently tried turning it on, wait until the cooling down process has completed before attempting to power it on again.
Why BenQ MS536 has no picture?
If your BenQ Projector displays no picture, it could be due to a few reasons. Ensure that the video source is turned on and correctly connected. Also, verify that the projector is correctly connected to the input signal device. Finally, make sure the correct input signal is selected using the SOURCE key.
Why is my BenQ MS536 image blurred?
If your BenQ Projector image appears blurred, it might be because the projection lens isn't correctly focused; try adjusting the focus using the focus ring. Also, check if the projector and the screen are not aligned properly; adjust the projection angle, direction, and height of the projector as needed.
General| Type | lamp |
|---|---|
| Color | white |
| Display | dlp |
| Throw Type | standard throw |
| Resolution | 600p |
| Native Resolution | 800 x 600 |
| Aspect Ratio | 4:3 |
| Remote Control | yes |
| Power Source | ac/dc power (plug-in) |
| Voltage | 110 volts |
To Next Page
