BenQ MX613ST - Page 43

43
YPbPr
NTSC (480i)/ 480p/ PAL
(576i)/576p, HDTV
(720P/1080i/p)
Contrast: Preset
Brightness: Preset
Color-bar pattern
3.1 Power Consumption:
Power consumption
Max. 336
W
Standby
1W Max. at 100 ~ 240VAC
(disable loop through, LAN control function, Pixelwork function)
Normal Typical 299
W
@110Vac
ECO Typical 245W@110Vac
3. OPERATIONAL INSPECTION CRITERIA:
No Description Class
1 Noise
1.1 When power on or po
w
er off, fan or color wheel get abnormal noise. Major
1.2 When normal operation, noise exceed noise level (refer to Q201 document) Major
2 Display Qualit
y
(include input: Video, S-video, YPbPr, and D-sub or RGB)
2.1 Focus range out of specification Major
2.2 Focus fail (focus not clear or flare/ defocus/ lateral color out of
specification)
Major
2.3 Brightness & Uniformity --- out of specification. Major
2.4 Contrast ratio --- out of specification Major
2.5 Color coordinates --- out of specification. Major
2.6 Light leakage out of specification (active area or out of active area) Major
2.7 Throw ratio out of specification Major
2.8 Room ratio out of specification Major
2.9 Picture distortion out of specification Major
2.10 DMD image out of speci
f
ication Major
2.11 Picture dust or other image quality out of specification Major
2.12 Gray stage check --- Missing stage Major
2.13 Video noise --- If video noise presented Major
2.14 DDC data error / incorrect Major
2.15 Mode detection error Major
2.16 OSD Malfunction Major
3 Audio Qualit
y
3.1 Audio malfunction Major
3.2 Speaker no function Major
3.4 Volume mute malfunction Major
4 Remote control malfunction Major