BenQ MX852UST - Page 18

Positioning your projector18
MW853UST
The screen aspect ratio is 16:10 and the projected picture is 16:10.
There is 5% tolerance among these numbers due to optical component variations. BenQ recommends that if
you intend to permanently install the projector, you should physically test the projection size and distance
using the actual projector before you permanently install it, so as to make allowance for this projector's optical
characteristics. This will help you determine the exact mounting position so that it best suits your installation
location.
WXGA
Screen size
(Diagonal)
Screen
width (W)
Screen
Height (h)
Projection
distance
(D)
Offset (H) Scale
parameter
Distance between
Wall plate &
projection screen
(V)
inch mm inch mm inch mm inch mm inch mm mm
80 2032 67 1723 42 1077 11.11 282.3 11.02 280 495 254.7
85 2159 71 1831 45 1144 12.73 323.3 11.59 294.3 535 269
87 2210 73 1874 46 1171 13.40 340.3 11.82 300.2 555 274.9
90 2286 76 1939 47 1212 14.38 365.3 12.16 308.9 580 283.6
92 2337 77 1982 48 1239 15.01 381.3 12.38 314.4 600 289.1
95 2413 80 2046 50 1279 15.98 405.8 12.72 323 625 297.7
97 2464 81 2089 51 1306 16.65 422.8 12.95 328.9 645 303.6
100 2540 85 2154 53 1346 17.55 445.8 13.26 336.9 665 311.6