Positioning your projector14
Positioning your projector
Using the quick install
The projector provides a hot key to set Projector Installation, Test Pattern, and 2D
Keystone quickly.
Press QUICK INSTALL on the remote control and press / to select from the
below items:
• Projector Installation. See "Positioning your projector" on page 14 for details.
• Test Pattern. See "Using the test pattern" on page 38 for details.
• 2D Keystone. See "Correcting keystone" on page 22 for details.
1. Choosing a location
Your projector is designed to be installed in one of the following possible installation
locations:
2. Using the test pattern
3. Correcting the image
• 2D Keystone correction
To Next Page
Loading...
