BenQ MX882UST - Connecting Smart Devices

Connection20
• If the selected video image is not displayed after the projector is turned on and the correct video source
has been selected, check that the video source device is turned on and operating correctly. Also check
that the signal cables have been connected correctly.
Connecting smart devices
The projector can project the content directly from a MHL compatible smart device. Using
a MHL wireless dongle, you can connect your smart devices to the projector and then
enjoy your content on the big screen.
Some smart devices may not be compatible to the cable that you use. Please consult the manufacturer of your
smart device for detailed information.
1. Take a HDMI wireless dongle or a USB wireless dongle and connect it the MHL input
connector on the projector.
2. Switch to the HDMI/MHL input source. To switch input signal, see "Switching input
signal" on page 28 for details.
a
b
8
6%
$ +'
0
, 0
+
/
8
6%
$ +'
0
, 0
+
/