BenQ PD3200Q User Manual

18 How to assemble your monitor hardware
Make sure the power switch next to the AC power
input jack is switched to ON.
Turn on the monitor by pressing the power button on
the monitor.
Turn on the computer too, and follow the instructions
in Getting the most from your BenQ monitor on page
25 to install the monitor software.
To extend the service life of the product, we recommend
that you use your computer's power management function.

BenQ PD3200Q Specifications

General

Color	black
Screen Type	led
Tiltable	yes
Wall Mount	100mm x 100mm
Webcam	no
OS Compatibility	windows
Screen Size	32 inches
Panel Type	va
Aspect Ratio	16:9
Resolution	2560 x 1440
Native Resolution	2560 x 1440
Refresh Rate	60hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	4 milliseconds
Brightness	300 candela per square meter
Contrast Ratio	20, 000, 000:1
Synchronization	not applicable
HDR	no
Built-In Speakers	yes
Interface Connectors	1 x hdmi
HDMI Ports	1
DVI	1
Power Consumption	88 watts
Depth with Stand	8.8 inches
Width with Stand	29.1 inches
Net Weight without Stand	18.7 pounds