BenQ PD3200Q User Manual

54 Navigating the main menu
Ergonomics menu
Available menu options may vary depending on the input sources, functions and settings. Menu
options that are not available will become grayed out. And keys that are not available will be
disabled and the corresponding OSD icons will disappear. For models without certain functions,
their settings and related items will not appear on the menu.
1. Select (Menu) from the hot key menu.
2. Use or to select Ergonomics.
3. Select to go to a sub menu, and then use or to select a menu item.
4. Use or to make adjustments, or use to make selection.
5. To return to the previous menu, select .
6. To exit the menu, select .
Display
Picture
Picture Advanced
Audio
KVM Switch
System
Ergonomics
Eco
Mode: Standard
Eye Protect
Eye Protect meter
Smart Reminder
Time Interval (min.)
Duration (sec.)
ON
OFF
Item Function Range
Eye Protect Your monitor comes with a light sensor, which detects the
light condition around the monitor and adjusts the monitor
backlight automatically. This is to protect your eyes from
overexposure to bright light.
If the light is sufficient, the monitor brightness is increased.
If the monitor is in a poor light, the monitor brightness is
decreased.
If you prefer to adjust the monitor brightness manually, go to
PICTURE > Brightness.
• ON
• OFF

BenQ PD3200Q Specifications

General

Color	black
Screen Type	led
Tiltable	yes
Wall Mount	100mm x 100mm
Webcam	no
OS Compatibility	windows
Screen Size	32 inches
Panel Type	va
Aspect Ratio	16:9
Resolution	2560 x 1440
Native Resolution	2560 x 1440
Refresh Rate	60hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	4 milliseconds
Brightness	300 candela per square meter
Contrast Ratio	20, 000, 000:1
Synchronization	not applicable
HDR	no
Built-In Speakers	yes
Interface Connectors	1 x hdmi
HDMI Ports	1
DVI	1
Power Consumption	88 watts
Depth with Stand	8.8 inches
Width with Stand	29.1 inches
Net Weight without Stand	18.7 pounds