Name: BenQ PD3200Q
Brand: BenQ
Rating: 5 (1 reviews)

To Next Page

To Previous Page

26 Getting the most from your BenQ monitor

How to install the monitor on a new computer

This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver

software on a new computer which has never had a monitor driver installed before. This

instruction is only suitable for a computer which has never been used before, and for which the

BenQ LCD Monitor is the first ever monitor to be connected to it.

1. Follow the instructions in How to assemble your monitor hardware on page 13.

When Windows starts, it will automatically detect the new monitor and launch the Found New

Hardware Wizard. Follow the prompts until it displays the option to Install Hardware Device

Drivers.

2. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.

3. Check Search for a suitable driver for my device option, and click Next.

4. Check the option for CD-ROM drives (uncheck all others) and click Next.

5. Look to confirm that the wizard has selected the correct name of your monitor and click

Next.

6. Click Finish.

7. Restart the computer.

If you are adding the BenQ LCD Monitor to an existing computer that has already had another monitor

connected to it (and has monitor driver software installed), you should not be following these instructions. You

should instead be following the instructions for How to upgrade the monitor on an existing computer.

To find the suitable driver files for the purchased model, refer to the following table.

Driver files Suitable models

PD3200Q PD3200Q / PD3200QE

PD3200U PD3200U / PD3200UE

Other manuals for BenQ PD3200Q

Questions and Answers:

Need help?

Do you have a question about the BenQ PD3200Q and is the answer not in the manual?

General