BenQ RP550+ - Screen Menu

The OSD (On-Screen Display) menu36
Screen menu
PAP Setting
Aspect Full
Adjust Screen
Freeze Off
Touch Feature Off
Screen
:Move
:Enter
:Exit
ENTER
EXIT
Name Description
PAP Setting
(Picture and
Picture)
• PAP: Turns on or off the PIP (Picture in Picture) and PBP (Picture by
Picture) functions.
• Active Picture: For the PIP, selects the main or sub picture to operate.
For the PBP, selects the left or right picture to operate. Swaps the main/
sub or left/right pictures.
• Picture Size: Changes the size of the sub picture.
• Picture Position: (PIP only) Changes the position of the sub picture.
• PAP is not available for all signal source combinations. See Supported PAP input signal
combination on page 64 for more information on supported combinations.
• In PAP mode, only sound from the active picture will be available.
Aspect
Sets the picture’s aspect ratio.
• Wide Zoom: Enlarges to fill screen with minimum distortion.
• Zoom: Enlarges the picture, keeping the same aspect ratio.
• Full: Enlarges the picture horizontally to fill the screen when the picture
source is 4:3 (Standard definition). When the picture source is 16:9 (High
definition), it displays in the same 16:9 aspect ratio.
• 4:3: Displays all picture source in 4:3 aspect ratio.